Please fill all required fields
  EZ-Ply    R E N T A L   E S T I M A T E    Worksheet  
Date of Estimate:
Instructions:
Estimate Ref. Code: 130907
1 - Enter your job information into white data fields.
Revision: 001
2 - Press the tab key to move between data fields.
Copyright © 2004-2013 Pacific Foundation Systems
3 - Click STEPs 2 or 3 (above) for system cost
800-510-9055
    comparisons and EZ-Ply  purchase options.
NOTE:  You may have to enable "Active Content" in your browser for this program to calculate.  Call 800-510-9055 if you have questions.
Contractor Information:
Job Site Information:
Name:
County:
Address:
Owner's Name:
City:
Job Address:
State: ZIP:
Job City:
Phone:
State:
ZIP:
Wall
Outside Wall Dimensions
Wall Qty Ties # of Corners
Bulk
Ledged
Number Heigth Length Thickness Est
Adj
Fixed 
Hinged
Heads Wall
1
ft.
in. ft.
in.
in.
2
ft.
in. ft.
in.
in.
3
ft.
in. ft.
in.
in.
4
ft.
in. ft.
in.
in.
5
ft.
in. ft.
in.
in.
6
ft.
in. ft.
in.
in.
7
ft.
in. ft.
in.
in.
8
ft.
in. ft.
in.
in.
TOTALS: Linear ft.
RENTAL COST ESTIMATE
ESTIMATE INFORMATION
Up to 14 Days Up to 28 Days Perimeter Form Surface: Square Feet
Form Rental:
Form Release: Gallons
Supplies:
Est. Wall Concrete Vol.: Cubic Yards
SUB-TOTAL:
Est. Adj
Del./Pickup:
Hrs/100 SqFt:
Total Man Hours
SUB-TOTAL: Tax Rate
Sales Tax: Est. Weight:
lbs
TOTAL $: $
NOTICE:  This worksheet is provided for estimating purposes only.  Your actual cost of rental/taxes could
    be more OR less than this estimate based on the final design and elevations of your project.
  Please use accordingly.  Prices subject to change without notice.
ADJUST QUANTITIES (Optional):  Adjust the quantities of selected EZ-Ply  accessories in the "Adjust" column
below.  To reduce a quantity input a negative amount.  The total quantity column and the rental amount will 
       be adjusted automatically.
Quantities Item
Est. Adjust Totals Number Description
01500 Bracket,Scaffold,20"
0 01505 Blockout,Beam (Pocket)
0 01550 Clamp,Strongback screw,4"
0 01555 Clamp,Strongback wedge,4"
0 01560 Clip,22.5^,Outside Corner (Plated)
0 01565 Clip,30^,Outside Corner (Plated)
0 01570 Clip,45^,Outside Corner (Plated)
0 01575 Clip,90^,Outside Corner (Plated)
0 01580 Clip,Corner,"E" (Plated)
0 01585 Clip,Half (Plated)
0 01590 Clip,Offset (Plated)
    0 01595 Clip,Panel,1-1/8" to 1-1/8"      
0 01600 Clip,Stacking,1-1/8" to 1-1/2"
0 01605 Plate,Stacking
0 01610 Rail,Line-up,12’
01647 Sprayer,3Gallon,Hand Pump
01650 Tool,Break-Off (Plated)
01660 Turnbuckle
0 01665 Waler,Bracket, 6”,H.D.
0 01670 Waler,Bracket, 8”,H.D.
01675 Waler,Bracket,10”,H.D.
0 01680 Waler,Bracket,12”,H.D.
01690 Waler,Top,W/Wedge (Plated)
01695 Waler,W/Wedge, 4” (Plated)
0 01700 Waler,Strongback,W/Wedge,7"
01705 Waler,Strongback,W/Screw,7"
03500 Form Release
  NOTICE:  This worksheet is provided for estimating purposes only.  Your actual cost of rental/taxes could  
    be more OR less than this estimate based on the final design and elevations of your project.
  Please use accordingly.  Prices subject to change without notice.
  Copyright © 2004-2013 Pacific Foundation Systems S  Y  S  T  E  M     C  O  S  T      C  O  M  P  A  R  I  S  O  N  S      
800-510-9055
General Cost Assumptions          EZ-Ply  System
Instructions:
Length
Unit Cost $
*First complete the STEP 1 - EZ-Ply  Rental Estimate (above) Lumber: 2"x4" ft. Description: Qty Cost $ Amount $
*Update General Cost Assumptions (right)
2"x10" ft. 2"x4"
*Update "white" data fields with appropriate rates
4'x8' - 3/4" (plywood sheet) 2"x10"
*Compare "Total Costs" of different forming systems (bottom) Labor: Cost per man-hour
Form Oil: Cost per gallon
Sub-Total
Set printer page to 'landscape' with 1/4 inch margins. Scaffolding: Cost of rental per section Sales Tax
Labor (man hours)
Sub-Total
14 Day Rental
$
14 Day Total Cost $
(OR)
28 Day Rental
$
28 Day Total Cost $
 Plywood and "snap-tie" system    Stacked plank system Insulated Concrete Forms (ICF's)
Double Walers?
    (yes/no) Strongback Spacing: in.
Snap-Tie Spacing: in.
Tie Spacing: in.
Description: Qty Cost $    Amount $ Description:      Qty Cost $ Amount $ Description:        Qty Cost $ Amount $
2"x4" 2"x4"
Units (square ft.)
2"x10" 2"x10"
2"x4"
Plywood 3/4" (Sheet) Spreader Ties 2"x10"
"Snap-Ties" Wedges
Scaffolding (rent)
Form Oil
Form Oil
Bracket (rent) Scaffolding (rent)
Form Aligners (rent)
Corner Lock (rent)
Scaffolding (rent)
Sub-total
Sub-total
Sub-total
Sales Tax
Sales Tax
Sales Tax
Labor (Hours per 100 Sq. Ft.)
Labor (Hours per 100 Sq. Ft.)
Labor (Hours per 100 Sq. Ft.)
Total Cost for "snap-tie" system:             $ Total Cost for plank system:                   $ Total Cost for ICF system:                      $
COMPARE with EZ-Ply 14 Day $ COMPARE with EZ-Ply 14 Day $ COMPARE with EZ-Ply 14 Day $
(Savings if positive) 28 Day $ (Savings if positive) 28 Day $ (Savings if positive) 28 Day $
  NOTICE:  This worksheet is provided for estimating purposes only.  Your actual cost of rental could be more OR less than this estimate based on the final  
 design and elevations of your project.  Please use accordingly.  Prices subject to change without notice.
    EZ-Ply    E S T I M A T E D    P U R C H A S E   O P T I O N S    
Copyright © 2004-2013 Pacific Foundation Systems                    
800-510-9055
Purchase Amount After Rental Payment
  Option # 1: Rental - Purchase 14 Day Rental-Purchase $      
28 Day Rental-Purchase $
  Option # 2: Lease - Purchase     Lease requires first and last payment down.  
 Monthly $  # of Payments
(Note:  3 month "Skip Payment Option" also available.) 24 Months: 24
36 Months: 36
10% Buyout at end of Lease Term.
48 Months: 48
  Option # 3: Loan     Loan requires first and last payment down.  
Monthly $ # of Payments
24 Months: 24
36 Months: 36
48 Months: 48
  Notes:   *These figures are estimates only.  Please call 1-800-510-9055 for firm quotation of prices.    
*Lease - Purchase plans available from third-party financial institution.
*These options are subject to credit approval.
*Please call for pricing on used items.
*Prices include estimated sales tax (if rate is available).
 
Powered By SpreadsheetConverter (6.0.4231.4231)